LG Repair Service in Oakham and Bellamy

What does error FE mean on an LG dishwasher?

Error FE on an LG dishwasher indicates the machine has detected too much water. Turn off the water supply and unplug the dishwasher. Check that you are using dishwasher detergent (not washing-up liquid which causes excessive suds). If the error persists, contact a specialist technician.

What does error bE mean on an LG dishwasher?

Error bE on an LG dishwasher indicates a button is stuck or being continuously pressed. Clean the control panel with a dry cloth, ensure no buttons are stuck, and restart the dishwasher. If the error persists, contact a specialist technician.

What does error PF mean on an LG dishwasher?

Error PF on an LG dishwasher indicates a power failure occurred during a cycle. Press any button to clear the code, then restart the cycle. If the error appears repeatedly without power interruptions, turn off the dishwasher for 1 minute then restart. If it persists, contact a specialist technician.

What does error dE mean on an LG tumble dryer?

Error dE on an LG tumble dryer indicates the door is not completely closed. Ensure nothing is blocking the door and close it firmly until you hear a click. Unplug the dryer for 10 seconds and restart. If the error persists, contact a specialist technician as the door latch may need inspection.

What does error OE mean on an LG washing machine?

Error OE on an LG washing machine indicates a drainage problem. Clean the pump drain filter at the front bottom of the machine, check the drain hose for blockages, and ensure it is correctly installed. If the problem persists, contact a specialist technician.

How often should I clean the filters on my LG dishwasher?

Switch off the dishwasher and allow it to cool if recently used. Clean the filters every one to two weeks, depending on usage frequency. Remove the lower rack, twist and lift out the cylindrical filter, then remove the mesh filter beneath. Rinse under running water and use a soft brush to remove food particles. Reassemble and ensure filters are properly seated to prevent damage to the spray arms.

Why are my glasses cloudy after dishwasher cycles?

Cloudy glasses are typically caused by hard water mineral deposits or etching. For hard water, ensure rinse aid is being used and water softener salt is topped up. Adjust your dishwasher's water hardness setting according to your local water supply. Etching (permanent cloudiness) occurs from washing delicate glassware at high temperatures or with too much detergent. Use a lower temperature cycle for fine glassware and reduce detergent quantity. Once etched, glass cannot be restored.

Why won't my LG washing machine door open?

The door will not open if water remains in the drum or if the drum is hot. Wait for the machine to cool and drain completely. If the door lock indicator is off but the door remains locked, switch off the machine and unplug it for one to two minutes, then try opening the door. After a power cut, the door may remain locked until the machine is powered on again. Never force the door open as this may damage the locking mechanism.

How do I use rinse aid in my LG dishwasher?

Rinse aid improves drying performance and prevents water spots on glassware. Locate the rinse aid dispenser on the inside of the door, lift the flap and fill to the maximum line without overfilling. Close the lid until it clicks. The dispenser releases rinse aid automatically during the final rinse. Adjust the dispensing level if needed: higher levels improve drying in hard water areas, lower levels are suitable for soft water. Refill when the rinse aid indicator illuminates.

What are the benefits of heat pump tumble dryers?

Heat pump tumble dryers recycle hot air rather than venting it, making them significantly more energy efficient than conventional dryers. They dry at lower temperatures, which is gentler on fabrics and helps clothes last longer. While drying cycles may take slightly longer, energy savings of up to 50% compared to vented dryers offset this.