LG Repair Service in Mansfield Woodhouse

What does error Er rS mean on an LG fridge freezer?

Error Er rS on an LG fridge freezer indicates the refrigerator temperature sensor has malfunctioned. Unplug the refrigerator for 10 minutes and reconnect. If the error persists, contact a specialist technician as the sensor may need replacement.

What does error Er dH mean on an LG fridge freezer?

Error Er dH on an LG fridge freezer indicates the defrost heater is not functioning correctly. If there is excessive ice buildup, unplug and allow to defrost completely. If the error reappears after restarting, contact a specialist technician.

What does error UE mean on an LG washing machine?

Error UE on an LG washing machine indicates an unbalanced load during spinning. Open the door and redistribute the laundry evenly. For single heavy items, add additional towels to balance the load. Restart the cycle.

What does error LE mean on an LG dishwasher?

Error LE on an LG dishwasher indicates a motor error. Turn off the dishwasher at the mains, wait 10 minutes, then restart. If the error persists, contact a specialist technician as the motor or wiring may need inspection.

What does error PF mean on an LG dishwasher?

Error PF on an LG dishwasher indicates a power failure occurred during a cycle. Press any button to clear the code, then restart the cycle. If the error appears repeatedly without power interruptions, turn off the dishwasher for 1 minute then restart. If it persists, contact a specialist technician.

Is it normal for my LG refrigerator to make noise?

Some sounds are normal during operation. A humming or buzzing indicates the compressor running. Clicking sounds occur when the defrost cycle starts or stops. Gurgling or bubbling is refrigerant flowing through the system. Rattling may indicate items on top of the fridge or the appliance touching a wall. A new refrigerator may be louder for the first 8-12 hours as it reaches operating temperature. Contact a qualified technician if you hear grinding, knocking or unusually loud noises.

How do I use rinse aid in my LG dishwasher?

Rinse aid improves drying performance and prevents water spots on glassware. Locate the rinse aid dispenser on the inside of the door, lift the flap and fill to the maximum line without overfilling. Close the lid until it clicks. The dispenser releases rinse aid automatically during the final rinse. Adjust the dispensing level if needed: higher levels improve drying in hard water areas, lower levels are suitable for soft water. Refill when the rinse aid indicator illuminates.

How often should I clean or replace the filters in my LG cooker hood?

Metal grease filters should be cleaned every 2-4 weeks depending on cooking frequency. Most are dishwasher safe or can be soaked in hot soapy water. Carbon filters in recirculating hoods cannot be cleaned and should be replaced every 3-6 months, or when extraction efficiency decreases noticeably.

What is the Tub Clean cycle and how often should I use it?

The Tub Clean cycle is a drum cleaning function that helps remove detergent residue, bacteria and odours from the washing machine drum. Run it once a month without any laundry in the machine. The cycle heats water to approximately 60°C to sanitise the drum. No detergent is required, though you may use a washing machine cleaner if desired.

How do I clean the heat exchanger on my LG heat pump tumble dryer?

Switch off the dryer and unplug it from the mains before cleaning. Clean the heat exchanger every 25 drying cycles or at least once a month. Open the heat exchanger cover at the bottom of the door opening. Slide out the heat exchanger unit and use a vacuum cleaner or soft brush to remove dust and lint from the fins. Rinse gently if heavily soiled and allow to dry completely before reinserting. Some LG models feature an Auto Cleaning Condenser that automates this process.