LG Repair Service in Newlands and Kingsley

What does error CE mean on an LG washing machine?

Error CE on an LG washing machine indicates a motor current error where the drum cannot reach the required rotation speed. Unplug the machine immediately. This error typically requires professional repair. Contact a specialist technician for diagnosis.

What does error dE mean on an LG washing machine?

Error dE on an LG washing machine indicates a door problem. Ensure the door is fully closed with no clothing caught in the seal. Check the door latch engages properly. If the error persists, contact a specialist technician.

What does error Er rS mean on an LG fridge freezer?

Error Er rS on an LG fridge freezer indicates the refrigerator temperature sensor has malfunctioned. Unplug the refrigerator for 10 minutes and reconnect. If the error persists, contact a specialist technician as the sensor may need replacement.

What does error IE mean on an LG washing machine?

Error IE on an LG washing machine indicates a water inlet problem. Check that the water tap is fully open, inspect the inlet hose for kinks, and clean the inlet filter screens. If the problem persists, contact a specialist technician.

What does Cd mean on an LG washer dryer combo?

Cd on an LG washer dryer combo is not an error but indicates the Cool Down phase after a drying cycle. The machine tumbles periodically to prevent wrinkles. Press any button to end the cool down phase. The door can be opened approximately 2 minutes after pressing the button.

What is LinearCooling technology?

LinearCooling technology maintains temperature within ±0.5°C of your set temperature, compared to ±3°C in conventional compressors. This consistent temperature helps food stay fresher for longer by reducing temperature fluctuations that can accelerate food spoilage. The Linear Compressor is also quieter and more energy efficient.

Can I wash and dry in one cycle on my LG washer dryer?

Yes, LG washer dryers offer an auto wash and dry function that completes both cycles without intervention. However, the drying capacity is typically half the washing capacity. For best results when using the continuous cycle, load no more than the rated drying capacity to ensure thorough drying.

Why is my LG fridge ice maker not working?

First, ensure the ice maker is switched on and the water supply is connected and turned on. Check that the freezer temperature is set to at least -18°C or colder. Allow 24 hours after installation for ice production to begin. If the ice maker arm is stuck in the raised position, gently lower it. Clear any ice blockages in the dispenser chute. Replace the water filter if it has not been changed in over six months.

Is it normal for my LG refrigerator to make noise?

Some sounds are normal during operation. A humming or buzzing indicates the compressor running. Clicking sounds occur when the defrost cycle starts or stops. Gurgling or bubbling is refrigerant flowing through the system. Rattling may indicate items on top of the fridge or the appliance touching a wall. A new refrigerator may be louder for the first 8-12 hours as it reaches operating temperature. Contact a qualified technician if you hear grinding, knocking or unusually loud noises.

What is the recommended temperature setting for my LG fridge?

Set the refrigerator compartment between 1°C and 5°C, with 3°C being optimal for most foods. Set the freezer to -18°C for proper food preservation. Avoid setting temperatures too low, as this wastes energy without improving food safety. Allow 24 hours after installation or adjustment for temperatures to stabilise.