Teka Repair Service in Ladybrook and Bull Farm

What does the E7 error mean on a Teka dishwasher?

The E7 error on Teka dishwashers indicates a pressure switch failure with an open circuit detected. Contact a specialist technician as this fault requires inspection and likely replacement of the pressure switch or reconnection of wiring.

What does the E2 error mean on a Teka dishwasher?

The E2 error on Teka dishwashers indicates a safety level malfunction where the water level limiting system has been triggered. Interrupt the programme and switch off the dishwasher. Wait a few minutes, then switch it back on and restart the washing cycle. If the problem persists, contact a specialist technician.

What does the Err7 error mean on a Teka washing machine?

The Err7 error on Teka washing machines indicates a secondary motor fault. Contact a specialist technician as the motor or motor control board may need inspection or replacement.

What does the E3 error mean on a Teka refrigerator?

The E3 error on Teka refrigerators indicates a problem with the refrigerator compartment temperature sensor. This sensor monitors the temperature in the main fridge section. Contact a specialist technician as the sensor may need inspection and replacement. Temperature regulation in the refrigerator section may be affected until repaired.

What does the Err2 error mean on a Teka washing machine?

The Err2 error on Teka washing machines indicates a drainage error where water has not drained within 6 minutes. Clean the pump filter located at the front bottom of the machine. Check the drain hose for blockages or kinks. Ensure the drain hose is not submerged in water. If the problem persists, contact a specialist technician.

How do I use the defrost function on my Teka microwave?

Press the defrost button and enter the weight of the food using the number keys. The microwave will automatically calculate the appropriate defrosting time based on the weight entered. The defrost power is preset and cannot be changed.

When should I refill the salt in my Teka dishwasher?

Refill the salt container when the salt indicator light illuminates on the control panel. Only use salt specifically designed for dishwashers, as table salt will damage the water softener. Fill the container with approximately 1.5kg of dishwasher salt, screw the cap back tightly, and start a wash programme immediately to prevent salt residue from remaining at the bottom of the machine.

Why won't my Teka washing machine door open after the cycle?

The door has a safety lock that remains engaged for approximately 2 minutes after the cycle completes. Wait for the lock to release before attempting to open the door. If the door still won't open, check if there is water remaining in the drum, as the door will not unlock until the water drains. Try running a drain or spin cycle. You can also try unplugging the machine for 20-30 minutes to reset the electronic lock.

What type of cookware can I use on my Teka induction hob?

Only cookware with a magnetic-steel base will work on an induction hob. Cast iron pans and most stainless steel pots are suitable. Aluminium and ceramic cookware will not work.

Why is my Teka washing machine vibrating excessively?

Excessive vibration is often caused by the machine not being level. Adjust the feet to ensure the machine is perfectly level. The problem can also be caused by overloading the drum.