Teka Repair Service in Forest Town

What does the Err5 error mean on a Teka washing machine?

The Err5 error on Teka washing machines indicates a water level error where the required level has not been reached within 8 minutes. Ensure the water tap is fully open and has adequate pressure. Check that the drain hose is installed at the correct height (80-100 cm) and is not submerged in water. If problems persist, contact a specialist technician.

What does the Err1 error mean on a Teka washing machine?

The Err1 error on Teka washing machines indicates that the door is not properly shut or the door lock is not engaging. Open and firmly close the door until you hear it click. Ensure no clothing is trapped in the door seal. If the error persists, the door lock mechanism may be faulty and require replacement by a technician.

What does the C90 error mean on a Teka induction hob?

The C90 error on Teka induction hobs indicates that the on/off sensor is obstructed, preventing the hob from switching on. Remove any objects from the touch control area. Clean the control surface thoroughly and dry it completely. The error should clear automatically once the sensor is no longer obstructed.

What does the E1 error mean on a Teka dishwasher?

The E1 error on Teka dishwashers indicates a water filling issue or that the anti-flooding system (Acquastop) has been triggered. Check that the water tap is fully open and verify the water pressure is adequate. Inspect the inlet hose for kinks or blockages. If the anti-flooding system has been triggered due to a leak, turn off the water supply and contact a specialist technician.

What does the E4 error mean on a Teka refrigerator?

The E4 error on Teka refrigerators indicates a defrost temperature probe failure. The probe monitors the evaporator temperature during defrost cycles. Contact a specialist technician as this sensor requires professional testing and likely replacement. This fault may cause excessive frost build-up if not addressed.

My Teka oven door is locked and won't open. How do I unlock it?

The oven door typically locks during pyrolytic cleaning and remains locked until the oven cools to a safe temperature. If the door stays locked after cooling, try disconnecting the oven from the power supply for 5-10 minutes, then reconnect it. The door may have locked due to accidental cancellation of the pyrolysis cycle before completion. If the problem persists, consult your user manual or contact a specialist technician.

How should I maintain my Teka refrigerator?

Clean surfaces that contact food regularly, along with accessible drainage systems. The rubber door seals should be cleaned regularly to prevent bacteria and mould growth, as they are warmer than the interior.

How should I maintain my Teka dishwasher?

Clean the outer surfaces and door lining regularly using a soft cloth moistened with water or mild detergent suitable for painted surfaces. Clean the door gaskets with a damp sponge. After every wash, turn off the water supply and leave the door slightly open to prevent moisture and odours from being trapped inside.

Why does my Teka gas hob flame go out at the minimum setting?

If the flame goes out at the minimum setting, the flame height may not have been adjusted correctly during installation. This adjustment is part of the installation process and involves setting the gas flow for each burner according to your gas pressure. When the flame height is not set correctly, the flame failure safety device will not detect the flame and will cut off the gas as a safety precaution. Contact a qualified gas engineer to adjust the flame heights.

How often should I clean the filters on my Teka cooker hood?

The metal grease filters must be cleaned at least once a month, depending on how frequently you cook. Grease accumulates whether the hood is switched on or not during cooking.