Beko Repair Service in Ladybrook and Bull Farm

What does error code F2 mean on a Beko hob?

Error code F2 on a Beko hob indicates the overheating protection has activated. Switch off the hob completely and unplug it from the mains if safely accessible. Allow it to cool for at least 30 minutes to one hour. Ensure there is adequate ventilation. If the error returns after cooling, contact a qualified technician.

What does error code Er 14 mean on a Beko tumble dryer?

Error code Er 14 on a Beko tumble dryer indicates the humidity sensor has exceeded the maximum permitted time. The sensor drying programme has run for too long without detecting dry laundry. Clean the humidity sensors inside the drum. Ensure adequate ventilation. If the problem continues, contact a qualified technician.

What does error code F8 mean on a Beko oven?

Error code F8 on a Beko oven indicates a door lock mechanism problem. The oven cannot confirm the door lock status, particularly during self-cleaning cycles. Ensure the door is properly closed. Do not attempt to force the door if it is locked. Contact a qualified technician as this fault requires professional diagnosis.

What does error code E18 mean on a Beko washing machine?

Error code E18 on a Beko washing machine indicates an unbalanced load. Stop the cycle and redistribute the clothes evenly around the drum. Add a few extra items to help balance the load. Restart the cycle. Avoid washing single heavy items on their own.

What does error code E3 mean on a Beko washing machine?

Error code E3 on a Beko washing machine means the heater is not switching off, indicating a control board relay fault. Switch off the machine immediately and unplug it from the mains. Do not use the machine again until it has been professionally repaired. Contact a qualified technician as this fault requires professional repair.

What temperature should my Beko freezer be set to?

Set your freezer to -18°C or lower to halt the growth of bacteria and microorganisms. A 4-star freezer needs to operate at -18°C as a minimum.

How often should I deep clean my Beko dishwasher?

Deep clean your dishwasher every few months, depending on how often you use it and how soiled your dishes typically are. Run an inner cleaning or Intensive programme with no dishes inside.

What temperature should my Beko fridge be set to?

Set your fridge to between 3°C and 5°C to slow bacterial growth and preserve perishable items effectively. In the UK, it's generally advised to keep your fridge at 5°C or below, though aiming for 4°C offers an extra layer of food safety.

Why is there water leaking from my Beko fridge freezer?

Water pooling inside or beneath your fridge freezer usually indicates a blocked drain hole. The drain hole is located at the back of the fridge compartment. Switch off and unplug the appliance, then carefully clear the blockage using a cotton bud or the cleaning tool provided. A blocked drain prevents condensation from draining properly to the evaporation tray.

How do I remove bad smells from my Beko washing machine?

Run an empty hot wash cycle at 90°C to kill bacteria and remove odour-causing residue. Clean the detergent drawer, door seal, and pump filter regularly. Leave the door slightly open after each wash to allow air circulation and prevent mould growth. Descale monthly in hard water areas.