Samsung Repair Service in Newlands and Kingsley

What does error 9C1 or 9E1 mean on a Samsung tumble dryer?

Error 9C1 or 9E1 on a Samsung tumble dryer indicates an abnormal voltage supply. The electrical current reaching the dryer is outside the normal operating range. Turn the dryer off and unplug it from the mains. Check that the dryer is on its own circuit and not connected via an extension lead. Wait a few minutes, then reconnect. If the code persists, contact an electrician or qualified technician.

What does error 4E or 4C mean on a Samsung dishwasher?

Error 4E or 4C on a Samsung dishwasher indicates a water supply issue. Turn the dishwasher off before checking. Ensure the water tap is fully open, inspect the inlet hose for kinks or blockages, and clean the inlet filter if accessible. If the code persists, contact a qualified technician.

What does error 3E or 3C mean on a Samsung washing machine?

Error 3E or 3C on a Samsung washing machine indicates a motor or pulsator issue. Turn the machine off and unplug it from the mains. Wait 30 seconds, then reconnect and restart the cycle. If the code continues to appear, contact a qualified technician as the motor may need inspection.

What does error 1E or 1C mean on a Samsung washing machine?

Error 1E or 1C on a Samsung washing machine indicates a water level sensor issue. The sensor that detects how much water is in the drum is not working correctly. Turn the machine off and unplug it from the mains for 30 seconds, then reconnect and restart. If the code persists, contact a qualified technician.

What does error LE or LC1 mean on a Samsung washing machine?

Error LE or LC1 on a Samsung washing machine indicates a water leak has been detected. Turn the machine off and unplug it from the mains immediately. Do not touch the appliance if you are standing in water. Check the drain hose is at the correct height and not positioned below the base of the machine. Inspect for visible leaks. If no leak is found, wait a few minutes and restart. If the code persists, contact a qualified technician.

How do I reset my Samsung dishwasher?

Unplug the dishwasher or turn off power at the circuit breaker, wait 1 to 5 minutes for the electrical charge to clear, then power it up again.

What does the red light mean on my Samsung Jet vacuum cleaner?

When the red light on the display lights up, check the condition of the dust bag and filters. The red light on the clogged icon indicates you should check and clean the washable micro filter in the dust bin.

How do I use steam cleaning on my Samsung oven?

Steam cleaning uses water vapour to soften baked-on food residue. Empty the oven and remove racks and accessories including any partition. Pour a cup of tap water (not distilled) into the Steam Clean tray or directly onto the oven bottom if there is no tray. Close the door, select Steam Clean, and press Start. Caution: After the cycle completes, open the door slowly and stand back to allow steam to escape safely. Risk of burns from hot steam.

How do I clean the filters in my Samsung dishwasher?

Allow the dishwasher to cool after a cycle before cleaning the filters. Turn off the dishwasher and open the door carefully, as hot steam may escape. Remove the lower rack, turn the filter handle anticlockwise to unlock and remove the filter cover. Remove the micro filter from underneath and clean both parts by removing dirt and debris under running water.

What should I do if my Samsung Jet Bot robot vacuum is not charging?

First, check that the docking station is plugged in and the outlet is working. Clean the charging pins on both the Jet Bot and the docking station with a dry cloth. Ensure the docking station is on a flat, level surface against a smooth wall. Manually place the Jet Bot on the station, aligning the charging pins. The LED will flash red, orange, and yellow while charging, then turn green when complete. If the robot repeatedly leaves the station, the pins are not connecting properly.