Brandt Repair Service

What does error E6 mean on a Brandt induction hob?

Error E6 on a Brandt induction hob indicates the IGBT power transistor for zone 2 has overheated. Switch off the hob and allow cooling time. Wait until the residual heat indicator turns off before touching the ceramic surface. Check ventilation is unobstructed. If the error continues, contact a specialised technician.

What does error d02 mean on a Brandt washing machine?

Error d02 on a Brandt washing machine indicates a drainage fault where the machine cannot drain water properly. Switch off and unplug the appliance before cleaning the pump filter at the lower front of the machine. Check the drain hose for kinks or blockages, and verify the drain connection is not airtight.

What does error F4 mean on a Brandt induction hob?

Error F4 on a Brandt induction hob indicates an open circuit in the ceramic plate temperature sensor for zone 1. Contact a specialised technician to replace the faulty sensor.

What does error E8 mean on a Brandt dishwasher?

Error E8 on a Brandt dishwasher indicates a water supply valve orientation fault or an open circuit in the distributary valve. Switch off the appliance and check the water supply connection. If the error persists, contact a specialised technician to inspect the valve mechanism.

What does error d14 mean on a Brandt dishwasher?

Error d14 on a Brandt dishwasher indicates an installation fault with drainage connection or water flow rate. Verify the drain hose is installed at correct height (40-90cm), ensure it's not pushed too far into the drain pipe, and check water supply pressure.

Is it normal for my Brandt induction hob to make noise?

Yes, sounds similar to a clock mechanism may occur when the hob is working. These are normal and related to induction technology. There may also be whistling sounds depending on your cookware.

How do I clean my Brandt induction hob?

For light dirt, use a damp sponge with hot water and wipe off. For baked-on dirt or sweet overflows, use a glass scraper to remove the large deposits, then finish with a damp sponge. For hard water marks, apply warm white vinegar to the stain, leave briefly, then wipe with a soft cloth.

How do I check if my Brandt dishwasher door seals properly?

Empty and dry the inside of the machine, insert a lit torch into the tank, then close the door with the lights off. You should not see any light escaping from around the door.

How do I clean the detergent drawer on my Brandt washing machine?

Press the release buttons on both sides of the drawer simultaneously to extract it. Remove the siphons from the rear, separate the drawer from its cover, rinse everything thoroughly, then reassemble and reinsert.

How does pyrolytic cleaning work on my Brandt oven?

The oven cleans itself using very high temperatures to burn off stains caused by spills and splattering. The smoke released is filtered through a catalyser. As a safety precaution, the door locks automatically and cannot be opened until the oven has cooled down. Select the 1.5-hour economy programme for regular maintenance or the 2-hour programme for heavily soiled ovens.